5 tips for self adhesive PVC film
Clean the surface before applying the film: A clean and dry surface will help the film adhere better and last longer.
Use a primer: A water-based primer will help the film stick to the surface, reduce the risk of air bubbles and wrinkles, and increase the lifespan of the film.
Measure and cut the film accurately: Measure the surface area carefully and cut the film accordingly to avoid excess material or gaps.
Use a spray bottle with soapy water: Spraying a solution of soapy water on the surface before applying the film will help you adjust and reposition the film if needed.
Use a squeegee to remove air bubbles: After applying the film, use a squeegee to remove air bubbles and smooth out any wrinkles, starting from the center and working towards the edges.